Need more maintenance support? — Learn More

TriNova logo

Fire & Gas Installation

Is your new fire & gas system going to be installed correctly and verified before turnover? TriNova installs detectors, controllers, alarms, and control-system interfaces to specification — with wiring, aiming, and configuration completed the first time and documented for handoff.

How TriNova performs a Fire & Gas Installation

Our certified technicians install point gas detectors, flame detectors, line-of-sight and open-path devices, fire & gas controllers, alarm panels, and audible and visual warning devices per system design. Wiring, terminations, grounding, device configuration, and aiming/alignment are executed to project standards, and integration with your PLC, DCS, SCADA, HMI, or fire & gas controller is established during install rather than deferred to commissioning.

The result is a system installed correctly the first time and ready for verification — with the as-built documentation your acceptance testing, warranty, and future maintenance all depend on.

Request Service

  • Installation of gas detectors, flame detectors, and open-path devices per system design
  • Fire & gas controller, alarm panel, and interface hardware installation
  • Warning and annunciation device installation — horns, strobes, beacons, manual call points, alarm bars
  • Wiring, terminations, and grounding to manufacturer and site specifications
  • Device configuration and aiming/alignment against coverage requirements
  • Integration with your PLC, DCS, SCADA, HMI, or fire & gas controller — with as-built documentation delivered at handoff

The Outcome

What Fire & Gas Installation delivers

Installed correctly the first time

Detector placement, aiming, wiring, and terminations executed to specification during install — not fixed later during commissioning. The chronic issues that trace back to installation shortcuts don't show up because the shortcuts weren't taken.

Response chain wired for end-to-end alarm delivery

The installation establishes the response path from every device through the fire & gas controller and into your PLC, DCS, SCADA, or HMI — so when the system detects, the response goes where it's supposed to go.

Warning devices integrated where operators can see and hear them

Horns, strobes, beacons, and annunciation devices installed and integrated so alarms indicate where operations needs them — not just generated at the controller. Local response is designed in, not bolted on later.

A documented as-built package

You receive complete as-built documentation — device locations, wiring routes, controller configuration, loop assignments, integration details, and system diagrams — built to support acceptance testing, warranty, and every future maintenance visit.

When to schedule an installation

Common reasons facilities request Fire & Gas Installation

  • New process unit, facility expansion, or capital project requiring fire & gas detection
  • Existing detection system reaching end of service life — full replacement rather than piecemeal repair
  • Adding fire & gas coverage to areas where it didn't exist before
  • Upgrading from legacy or obsolete detection to a current-generation platform
  • Recovering from a failed, non-compliant, or partially completed prior installation

 Fire & Gas Installation FAQs

How does TriNova coordinate with our other contractors or EPC? We're used to plugging into active construction, project, and turnaround schedules. Our team coordinates directly with your EPC, electrical contractors, mechanical contractors, and operations staff to sequence around structural work, cable pulls, hot work permits, and control-system tie-ins. Installation runs to your project schedule, not around it.

Do you install warning and annunciation devices, or just detectors? Both. The installation covers the full detection and response chain — detectors (gas, flame, open-path), fire & gas controllers, alarm panels, warning devices (horns, strobes, beacons, manual call points, and annunciators), and the wiring and integration that ties everything into your control system. A detection installation without indication and response coverage isn't a complete installation.

What's included in the handoff at the end? A complete as-built package: device locations, wiring diagrams, controller configuration snapshots, loop assignments, control-system integration notes, and any commissioning prerequisites your team or our commissioning crew needs to take the system live. Maintenance, warranty, and future audits all start from this record.

Request a Quote

Fill out the form below and we’ll get back to you as soon as possible.